Menu
Call (323) 924-8777

6 a.m. - 11 p.m. every day

Step-by-step guide

Moved Into a Home With myQ? Transfer Ownership and Secure Garage Access

Resolve myQ Error 310 after moving. Separate ownership transfer, factory reset, remotes and keypad access, then verify your garage handover.

Phone held inside a garage with a closed door.

A working remote can make a garage handover look finished. It proves that one control operates the door; it does not tell you which account manages the connected equipment or who still has access. Before connecting your phone, make a short inventory of what came with the house. That turns an uncertain collection of remotes, sensors and app messages into a manageable setup task.

Identify what actually needs to change hands

Start with the labels on the accessible equipment. A Wi-Fi-enabled opener, an add-on smart hub, a video keypad and a separate camera are different devices. Record the model of each one, which garage opening it serves and whether you have its manual. Keep serial numbers in a private record rather than posting photographs of them publicly.

Previous-owner account and new-owner account are shown as separate ownership states for a myQ device.
One device, one owner account
  • Count the remotes supplied with the property and identify the doors they operate.
  • Record each keypad and whether you received a current PIN.
  • List any vehicles whose built-in controls should continue working.
  • Identify cameras, hubs or smart accessories separately from the motor unit.
  • Confirm who is authorized to manage the equipment, especially in a rental or shared garage.

Do not reset a community gate, a shared parking system or equipment managed by a landlord without their permission. The correct outcome may be a newly issued credential rather than transferring ownership of the hardware.

Read the message before choosing a reset

Chamberlain's ownership guidance distinguishes an account association problem from a network problem. Error 310 means the myQ serial number is associated with another account. Changing your router or reinstalling the app does not resolve that ownership association. Conversely, an offline message alone does not establish that a previous owner is the problem.

Two supported ownership-resolution paths and the distinction from Wi-Fi reset.
Error 310 is an ownership problem
Choose the next step from the symptom
What you seeUseful next step
Another-account message or Error 310Follow the ownership-transfer route for that device.
Your own device is offline after a router changeUse the manufacturer's network-reconnection guidance.
You cannot sign in to your own accountRecover that account rather than resetting the garage hardware.
The door is crooked, damaged or moving unpredictablyStop operation and address the physical fault before app setup.

Save the exact wording and the step where it appeared. “It will not connect” can describe several different failures. A screenshot with personal information removed is much more useful when seeking support.

Arrange a clean handover with the previous owner

If the previous owner is reachable, ask them to follow myQ's moving-out instructions for the devices remaining at the property. Do not ask for their account password. The new household should use its own account, with access deliberately granted to the people who need it.

Before removal, read the device-specific consequences and be ready to set up affected remotes and keypads again. Do not assume that removing the account leaves every physical control unchanged.

Agree on a time when everyone knows the equipment may need setup. Have a separate way into the home, keep the doorway clear, and avoid making changes just before someone must leave. Work on one opening at a time. Labeling the first garage “left door” on a private checklist can prevent an accidental reset of the adjacent unit.

After removal, attempt to add the correct device to your account. Successful ownership transfer should let setup proceed without the previous-account error. It is still worth checking the remaining devices individually: a working opener tile does not demonstrate that a separate camera or video keypad was transferred.

If a factory reset is necessary, prepare before pressing buttons

The official reset guide provides different procedures for different product families. For a Wi-Fi garage door opener, a factory reset can remove paired remotes, wireless keypads, HomeLink programming and myQ accessories. Read the consequences for your exact device before beginning. A Wi-Fi reset and a factory reset are not interchangeable.

Prepare a simple recovery sheet: device, intended account, manual, accessories to restore and final test result. Have the authorized users available to reconfigure their own vehicles or phones. Do not record their passwords or retain more personal information than the task needs.

Watch for the reset confirmation described in the manual. If the expected response does not occur, stop and recheck the model and instructions. Repeatedly holding unfamiliar buttons can erase settings without solving the original issue. If a confirmed reset still leaves an ownership error, contact myQ support with the device details through its official channel.

Restore access one method at a time

Once ownership is resolved, use the myQ setup and connection guide to organize the next stage. Verify the physical door position while testing; do not rely only on an app status label.

Account access, Wi-Fi setup and physical remote/keypad controls are reviewed separately after moving.
Verify access routes after the move
  1. Confirm the door is safe to operate. Keep people and vehicles clear and stop for unusual movement or damaged components.
  2. Set up the account and device. Give each opening a recognizable name.
  3. Restore the controls you intend to keep. Follow the compatible accessory's instructions and test it individually.
  4. Review keypad access. Use the model-specific process to replace inherited credentials. Our guide to keypad PINs and temporary access explains what to check.
  5. Review invited app users. Grant only the access each person needs and remove obsolete invitations or users through the supported controls.

Keep a short completion record without writing down PINs: correct owner account, correct door names, intended remotes tested, keypad updated and app users reviewed. This makes the next move or household change easier to manage.

Know when the problem needs service

An account transfer cannot correct damaged sensors, a failing opener or a door that binds. If the wall control and authorized remote also fail, separate that physical symptom from the app error. Describe what each control does and whether the motor, light or door responds. A technician can use those observations during garage door opener diagnosis.

The goal is a verified handover: the correct household controls the connected devices, intended users can enter, old access has been reviewed, and the door operates safely. A completed app setup is one part of that check, not the entire job.

Sources & manuals
Robert Jenkins

About the author

Robert Jenkins

Garage door specialist at Local Garage Experts

Your friendly neighborhood garage expert. Let’s make your garage door worries a thing of the past!

Browse all guides →
  • 25+Years experience
  • 3,142Projects completed
  • 24Certifications